Hardness Tester

신제품Hardness Tester
제품코드	G036254
판매가격	가격협의
제품분류	측정/계측/검사/시험기 > 검사시험기
제품사양	Hardness Tester
모델명	MH 310
제조사	알수없음
판매지역	전국
거래방식	직거래
제조년도	2100 년
A/S여부	가능
설치 및 시운전	가능
세금계산서	가능
제조국가	-

제품 QR코드

등록자정보

회사명	희몽무역	담당자	김영완
전화번호	02-869-7082	휴대전화	***
이메일	webmaster@testerhouse.co.kr	홈페이지	http://www.testerhouse.co.kr
주소	경기 광명시 소하동 1345 광명테크노파크 E동 612호	제품홍보관	http://blog.yeogie.com/testerhouse

제품상세정보

ADVANTAGES

Wide measuring range. Based on the principle of Leeb hardness testing theory. It can measure the Leeb hardness of all metallic materials.
Large screen LCD, showing all functions and parameters. With EL background light.
Seven impact devices are available for special application. Automatically identify the type of impact devices.
Test at any angle, even upside down.
Direct display of hardness scales HRB, HRC, HV, HB, HS, HL.
Large memory could store 100 groups (Relative to average times 32～1 ) information including single measured value, mean value, impact direction, impact times, material and hardness scale etc.
Battery information showing the rest capacity of the battery and the charge status.
User calibration function.
Software to connect to PC via USB port.
Thermal printer integrated, convenient for in field printing.
NI-MH rechargeable battery as the power source. Charge circuit integrated inside the instrument. Continuous working period of no less than 150 hours (EL off and no printing).
Auto power off to save energy.
Outline dimensions：212mm×80mm×32mm
 

MAIN APPLICATION
Die cavity of molds
Bearings and other parts
Failure analysis of pressure vessel, steam generator and other equipment
Heavy work piece
The installed machinery and permanently assembled parts
Testing surface of a small hollow space
Material identification in the warehouse of metallic materials
Rapid testing in large range and multi-measuring areas for large-scale work piece


TECHNICAL SPECIFICATIONS
Error and repeatability of displayed value:

 

No.	Type of impact device	Hardness value of Leeb standard hardness block	Erro of displyed value	Reapeatability
1	D	760±30HLD 530±40HLD	±6 HLD ±10 HLD	6HLD 10HLD
2	DC	760±30HLD 530±40HLD	±6 HLDC ±10 HLDC	6HLD 10HLD
3	DL	878±30HLD 736±40HLD	±12 HLDL	12HLDL
4	D+15	766±30HLD 544±40HLD	±12 HLD+15	12HLD+15
5	G	590±40HLD 500±40HLD	±12 HLG	12HLG
6	E	725±30HLD 508±40HLD	±12 HLE	12HLE
7	C	822±30HLD 590±40HLD	±12 HLC	12HLC

Measuring rangeHLD170~960 HLD
Measuring direction 360°
Hardness Scale HL HB HRB HRC HRA HV HS
Display segment LCD
Data memory 100 groups max. relative to impact times 32~1
Printing paper: width is 57.5±0.5 mm, diameter is 30mm
Battery pack: 6V NI-MH
Battery charger: 9V/500mA
Continuous working period about 150 hours With backlight off, no printing
Communication interface USB1.1
Outline dimensions 212mm×80mm×32mm


CONFIGURATION

 

	No.	Item	Quantity	Remarks
Standard Configuration	1	Main uni	1
	2	D type impact device	1	With cable
	3	Standard test block	1
	4	Cleaning brush (I)	1
	5	Small support ring	1
	6	Battery Charger	1	9V 500mA
	7	Paper for printing	1
	8	Manual	1
	9	Instrument package case	1
Optional Configuration	11	Cleaning brush (II)	1	For use with G type impact device
	12	Other type of impact devices and support rings		Refer to Table 3 and Table 4 in the appendix.
	13	DataPro software	1
	14	Communication cable	1
	15
	16

 

 

※ 출처 : 여기에 기계플라자 - [G036254] Hardness Tester