산업포털여기에

'(주)천성테크'에 해당되는 글 5건

  1. 2013.12.16 Water 순수장치
  2. 2013.12.16 고정식 격자 패턴 3D 분석장비
  3. 2013.12.16 자분 탐상 장비 (MT-System)
  4. 2013.12.16 도장·도료 도포시험기
  5. 2013.12.16 자동 만능 박판 성형 시험기

Water 순수장치

2013. 12. 16. 11:49 : 측정/계측/검사/시험
신제품Water 순수장치
제품코드G028922
판매가격가격협의
제품분류측정/계측/검사/시험기 > 검사.시험기.계측기 기타
제품사양하단표기
모델명B10dN
제조사BEHR
판매지역전국
거래방식직거래
제조년도2013 년
A/S여부가능
설치 및 시운전가능
세금계산서가능
제조국가-
제품 QR코드
제품 QR코드
등록자정보
회사명(주)천성테크담당자(주)천성테크
전화번호02-2201-6480휴대전화***
이메일cwyang@chunsung.co.kr홈페이지http://chunsung.co.kr
주소서울특별시 광진구 아차산로 349 (자양동, 천성빌딩) 4층제품홍보관http://blog.yeogie.com/chunsung
제품상세정보
Water 순수장치

Water Demineralizer  순수장치 Model B10dN

chunsung_co_kr_20131216_114800.jpg

제품 Spec
- Demineralizer Model : B10dN
  - Capacity (liters) : 1,200 ℓ
  - Max. Flow rate (1/h) : 300
  - ∮ (cm) : 21
  - Height canister with cond. Unit (cm) : 68
  - Height canister only (cm) : 55
  - 무게 (weight) : 약 13kg

* 사용용도
  고순도물을 공급해주는 안전하고 편리한 혼합층(cationic & anionic) 이온교환기로 일반 시험실이
  나 산업용으로 사용하며 역삼투 장치와 함께 2단계 정화에 적합하다.

* 특징  
  - 수지층을 통한 균일한 물 분배로 최대이온교환용량의 최적의 이용
  - behropur radial slit-jet 시스템은 투입된 물을 전체 수지층으로 균일하게 퍼뜨리고 교환용량과
    물의 질을 최대화시킨다.
  - 압력 리듀서 없이도 상수도에 직접 연결 가능하다.
  - 수압의 피크와 변화로 인한 손상에 강하다.
  - conduction은 수지통에 직접 장착된 계량기로 감시된다

※ 출처 : 여기에 기계플라자 - [G028922] Water 순수장치

'측정/계측/검사/시험' 카테고리의 다른 글

초음파 진단기  (0) 2013.12.17
초음파두께측정기  (0) 2013.12.17
고정식 격자 패턴 3D 분석장비  (0) 2013.12.16
자분 탐상 장비 (MT-System)  (0) 2013.12.16
도장·도료 도포시험기  (0) 2013.12.16
Posted by NO1여기에

고정식 격자 패턴 3D 분석장비

2013. 12. 16. 11:47 : 측정/계측/검사/시험
신제품고정식 격자 패턴 3D 분석장비
제품코드G028921
판매가격가격협의
제품분류측정/계측/검사/시험기 > 검사.시험기.계측기 기타
제품사양하단표기
모델명격자 패턴 3D 분석장비
제조사VIALUX
판매지역전국
거래방식직거래
제조년도2013 년
A/S여부가능
설치 및 시운전가능
세금계산서가능
제조국가-
제품 QR코드
제품 QR코드
등록자정보
회사명(주)천성테크담당자(주)천성테크
전화번호02-2201-6480휴대전화***
이메일cwyang@chunsung.co.kr홈페이지http://chunsung.co.kr
주소서울특별시 광진구 아차산로 349 (자양동, 천성빌딩) 4층제품홍보관http://blog.yeogie.com/chunsung
제품상세정보
고정식 격자 패턴 3D 분석장비

AutoGrid® vario system  격자 패턴 3D 분석장비

chunsung_co_kr_20131216_114438.jpg

? 

제품 Spec

1) Measuring head
4 progressive scanning CCD cameras 780 (H) x 582 (V)
active pixel with high quality measuring lenses;
PC connection and power supply via a single 4 m cable
using the firewire interface convenient transport box
------------------------------------------------------
2)Computer
brand mark first class PC with worldwide service
----------------------------------------------------------------------------------
3)Environment temperature: operating 10 ... 35° C, non-operating: -40 ... +70° C
humidity: 20%...93% non-condensing
----------------------------------------------------------------------------------
Software Microsoft Windows XP Professional
full compatibility with Microsoft Office applications and other standard software
Measuring volume up to 500(400(200 mm³ per image set (other volumes on demand)
Field of data up to 12.000 measured points per single measurement;
combined measurements without size limitation
Calibration fixed optical setup maintaining long term calibration;
automated, robust self-calibration procedure (3 min) using certified calibration gauge
Measuring time 3-5 min for a complete analysis of one image set
Results 3D shape: coordinates x,y,z [mm] at grid line crossing points; engineering strain ε [%],
true strain ϕ, v.Mises equivalent strain, thinning [%], thickness [mm], safety strain, max.
failure
Grid size/
recommended FOV
mm 1.0 2.0 2.5 5.0
mm³ 80x60x30 160x120x60 200x150x75 400x300x150
Strain accuracy
(rms)
for grid size 2.0 mm Δε = 0.2%
Graphs 3D surface display using original object grid for direct result mapping to object
colour encoded presentation of strain and thickness as texture on the 3D object
2D data profiles along user defined curves
forming limit diagram (FLD) with various FLC’s and auxiliary lines
interactive tool for the creation of FLC’s from strain data sets
free editable FLD reports
Export graphs: printer, clipboard, *.bmp, *.tif, *.png, *.jpg, *.vrml, *.ps, *.eps
data: ASCII, AutoForm, Pam-Stamp, *.stl, AutoCAD, LS-Dyna

Highest flexibility for component analysis and in-process materials testing
       
 
ViALUX provides a fast and accurate tool for the determination of forming limit curves (FLCs) of sheet metal materials. Directly connected to the testing machine, the system gives precise ac-cess to the maximum strain value just before necking and subsequent cracking occurs.
The AutoGrid® software package allows to create FLCs from a set of specimens very effectively.

  With the knowledge of the original undeformed grid size, the system is able to determine a field of strain values in the range of 0.5 % to more than 100 % without any unambiguity. Grid sizes range between 1-5mm. Images sequences of up to 24x4 frames per second can be recorded. In case of the standard testing velocity of 1-2 mm ? s, a punch depth resolution of less than 0.1 mm can be achieved. The system also features additional data inputs that can track different values from the testing machine.

For example, press load and punch stroke can be stored with each measurement. Automatic evaluation helps to generate complete forming limit curves. All process variables of differently shaped specimen are provided to determine reliable FLC data. Advanced software features can be used to process an export the measurement data and to make reports. The system also meets the requirements of bulge or tensile testing

※ 출처 : 여기에 기계플라자 - [G028921] 고정식 격자 패턴 3D 분석장비

'측정/계측/검사/시험' 카테고리의 다른 글

초음파두께측정기  (0) 2013.12.17
Water 순수장치  (0) 2013.12.16
자분 탐상 장비 (MT-System)  (0) 2013.12.16
도장·도료 도포시험기  (0) 2013.12.16
자동 만능 박판 성형 시험기  (0) 2013.12.16
Posted by NO1여기에

자분 탐상 장비 (MT-System)

2013. 12. 16. 11:42 : 측정/계측/검사/시험
신제품자분 탐상 장비 (MT-System)
제품코드G028920
판매가격가격협의
제품분류측정/계측/검사/시험기 > 검사.시험기.계측기 기타
제품사양하단표기
모델명자분 탐상 장비 (MT-System)
제조사KARL DEUTSCH
판매지역전국
거래방식직거래
제조년도2013 년
A/S여부가능
설치 및 시운전가능
세금계산서가능
제조국가-
제품 QR코드
제품 QR코드
등록자정보
회사명(주)천성테크담당자(주)천성테크
전화번호02-2201-6480휴대전화***
이메일cwyang@chunsung.co.kr홈페이지http://chunsung.co.kr
주소서울특별시 광진구 아차산로 349 (자양동, 천성빌딩) 4층제품홍보관http://blog.yeogie.com/chunsung
제품상세정보
자분 탐상 장비 (MT-System)

DEUTROFLUX  Magnetic Particle Crack Detector UWS

chunsung_co_kr_20131216_113956.jpg

제품 Spec
Detection of surface cracks on long workpieces
 
The magnetic-powder crack detection bench DEUTROFLUX UWS with moveable coil is especially suitable for testing of long workpieces. The motor-driven coil ensures ensure a high and constant testing sensitivity for the entire workpiece surface. Different designs make the bench suitable for workpieces with 1000 mm to 3000 mm length (500 mm steps) and a maximum weight of 500 kg (UWS 1000, UWS 1500, UWS 2000) respectively 1000 kg (UWS 2500, UWS 3000).

   Design example
 This example shows an inspection system for large turbine blades (approx. 3 m).
 

Fig. 1 General view of the inspection system with roof for the inspection cabin. The roof is designed for specimen loading with a crane.
 

Fig. 2 Special contacts for the current magnetization of turbine blades and the moving coil for the longitudinal field magnetization.
 

   Technical Data
  • Testing bench in robust lightweight design with tub for excess testing agent
  • Separate switch cabinet
  • Control panel on the unit
  • Safety foot switch
  • Outlets 200 V, for UV large area lamp
  • Separate tub for testing agent, contents 80 l complete with pump, circulating system, metering valve and supply pipes
  • 2 independent magnetizing circuits for combined magnetization (e.g. testing for cracks of all directions within one test cycle!)
  • Moving coil (400 x 400 mm, 8500 AW), for AC flow with spraying device on both sides (crack detection is possible both with forward and return move of the coil), drive of the coil by electric motor
  • Current flow 2000 A (eff), 30 % duty cycle
  • Infinitely variable adjustment of current
  • Automatic cycle switching device for all control processes
  • Adjustment of clamping length by means of of a smoothly moving carriage, can be arrested in any position
  • Pneumatic contacting
  • Maintenance unit for compressed air
  • Smoothly moving support rolls for manual rotation of rotationally symmetric parts
  • Connection 380 V, 50 Hz
  • Lacquer coat: cabinet RAL 7033 grey, bench RAL 7016
  • 2 Liter FLUXA Concentrate HRS, art. no. 9306 for putting-into-operation
  • 3 instruction manuals in German or English

※ 출처 : 여기에 기계플라자 - [G028920] 자분 탐상 장비 (MT-System)

'측정/계측/검사/시험' 카테고리의 다른 글

Water 순수장치  (0) 2013.12.16
고정식 격자 패턴 3D 분석장비  (0) 2013.12.16
도장·도료 도포시험기  (0) 2013.12.16
자동 만능 박판 성형 시험기  (0) 2013.12.16
종이굴곡시험기  (0) 2013.12.16
Posted by NO1여기에

도장·도료 도포시험기

2013. 12. 16. 11:36 : 측정/계측/검사/시험
신제품도장·도료 도포시험기
제품코드G028919
판매가격가격협의
제품분류측정/계측/검사/시험기 > 검사.시험기.계측기 기타
제품사양하단표기
모델명COATMASTER 510
제조사ERISHEN
판매지역전국
거래방식직거래
제조년도2013 년
A/S여부가능
설치 및 시운전가능
세금계산서가능
제조국가-
제품 QR코드
제품 QR코드
등록자정보
회사명(주)천성테크담당자(주)천성테크
전화번호02-2201-6480휴대전화***
이메일cwyang@chunsung.co.kr홈페이지http://chunsung.co.kr
주소서울특별시 광진구 아차산로 349 (자양동, 천성빌딩) 4층제품홍보관http://blog.yeogie.com/chunsung
제품상세정보
도장·도료 도포시험기

Film Applicator and Drying Time Recorder 

전동식 도료 도포기 Model COATMASTER 510

chunsung_co_kr_20131216_113310.jpg

제품 Spec
Basic Unit:
Dimensions: L 610 mm W 425 mm H 210 mm
Weight, net: approx. 23 kg
Power supply: 100 - 240 V, 50 - 60 Hz
via wide-range power
supply unit
Drawn-down speeds: Freely adjustable in the
range of 0.1 ? 19.9 /
20 - 100 mm/s
Dryness test times: Freely adjustable in the
range of 0.1 ?19.9 /
20 - 108 min/cm

Microprocessor controlled Film Applicator and Drying Time Recorder, with free adjustable drawing-down speed in the range of 0.1 - 19.9 / 20 - 100 mm/s as well as free adjustable dryness test time in the range of 0.1 - 19.9 / 20 - 108 min/cm, with integrated ejector (vaccum function to fix the substrates using by vacuum suction plates), including paint collection trough.
Power supply: 100 - 240 V, 50/60 Hz via wide-range power supply unitx.
 
ATTENTION:
The basic unit is not functional without the appropriate accessories. It is therefore necessary to order the appropriate accessories (glass plate, applicator, test tools etc.) with the basic unit in order to carry out the required tests.

   

※ 출처 : 여기에 기계플라자 - [G028919] 도장·도료 도포시험기

'측정/계측/검사/시험' 카테고리의 다른 글

고정식 격자 패턴 3D 분석장비  (0) 2013.12.16
자분 탐상 장비 (MT-System)  (0) 2013.12.16
자동 만능 박판 성형 시험기  (0) 2013.12.16
종이굴곡시험기  (0) 2013.12.16
자동 하중 시험기  (0) 2013.12.16
Posted by NO1여기에

자동 만능 박판 성형 시험기

2013. 12. 16. 11:32 : 측정/계측/검사/시험
신제품자동 만능 박판 성형 시험기
제품코드G028918
판매가격가격협의
제품분류측정/계측/검사/시험기 > 검사.시험기.계측기 기타
제품사양하단표기
모델명142-Basic
제조사(주)천성테크
판매지역전국
거래방식직거래
제조년도2013 년
A/S여부가능
설치 및 시운전가능
세금계산서가능
제조국가-
제품 QR코드
제품 QR코드
등록자정보
회사명(주)천성테크담당자(주)천성테크
전화번호02-2201-6480휴대전화***
이메일cwyang@chunsung.co.kr홈페이지http://chunsung.co.kr
주소서울특별시 광진구 아차산로 349 (자양동, 천성빌딩) 4층제품홍보관http://blog.yeogie.com/chunsung
제품상세정보
자동 만능 박판 성형 시험기

Universal Sheet Metal Testing Machine  자동 만능 박판 성형 시험기 Model 142-Basic

chunsung_co_kr_20131216_112943.jpg

제품 Spec
*Drawing force 142-20 200 kN
                      142-40 400 kN
*Blanking force 142-20 260 kN
                      142-40 600 kN
*Blankholder force 142-20 up to 40 kN
                          142-40 up to 220 kN
*Drawing punch stroke 142-20 approx. 80 mm
                                142-40 approx. 120 mm
*Blankholder stroke approx. 38 mm
*Drawing punch dia. 142-20 up to 50 mm
                              142-40 up to 75 mm
*FLC test (drawing punch-ø) up to 100 mm
*Bulge test (bulge-ø) up to 100 mm
*Blank diameter 142-20 up to 120 mm
                        142-40 approx. 170 mm
*Drawing speed 142-20 approx. 800 mm/min
                        142-40 approx. 900 mm/min
*Digital displays Resolution:
Drawing punch stroke 0.1 mm
(on request 0.01 mm)
*Manometer:
-Drawing force 200 kN/400 kN
-Blankholder force 40 kN/220 kN
*Mains supply 230 V / 400 V / 3 ∼, 50 Hz
(other voltages on request)
*Power required 142-20 approx. 3.0 kW
                        142-40 approx. 7.5 kW
*Dimensions (H x W x D)
-142-20 approx. 1250 x 1250 x 960 mm
-142-40 approx. 1250 x 1500 x 1160 mm
*Weight, net 142-20 approx. 600 kg
                  142-40 approx. 800 kg

1. Model 142-20-Basic
with electro-hydraulic drive, max. drawing force 200 kN and for pre-setting the blank holder pressure max. 40 kN, for testing sheets and strips of all types for the properties important for press working, stretch and deep drawing quality using the: 
  1. Erichsen Cupping Test according to EN ISO, EURONORM, BS, NF, GOST, UNI, UNE,
  2. Deep Drawing Cup Test in a first and a redrawing operation,
  3. Deep Drawing Bore Expanding Test acc. to Siebel and Pomp (KWI),
  4. Bore Expanding Tests acc. to ISO 16630,
  5. Tools for Determination of Forming Limit Curves (FLC) acc. to ISO 12004,

including
  • blanking press in the test head (max. blanking force 260 kN),
  • test piece ejector,
  • PLC,
  • automatic test sequence with stop at specimen failure (as of 0.3 mm sheet thickness),
  • digital display of punch stroke,
  • drawing force manometer,
  • sheet holder force manometer,
  • Erichsen test tool no. 27 acc. to EN ISO, EURONORM, BS, NF, JIS etc..
2. Model 142-40-Basic
with electro-hydraulic drive, max. drawing force 400 kN and for pre-setting the blank holder pressure of 220 kN, for testing sheets and strips of all types for the properties important for press working, stretch and deep drawing quality using the:
  • Erichsen Cupping Test according to EN ISO, EURONORM, BS, NF, GOST, UNI, UNE,
  • Deep Drawing Cup Test in a first and a redrawing operation,
  • Deep Drawing Bore Expanding Test acc. to Siebel and Pomp (KWI),
  • Bore Expanding Tests acc. to ISO 16630,
  • Tools for Determination of Forming Limit Curves (FLC) acc. to ISO 12004,

including
  • blanking press in the test head (max. blanking force 600 kN),
  • test piece ejector,
  • PLC,
  • automatic test sequence with stop at specimen failure (as of 0.3 mm sheet thickness),
  • digital display of punch stroke,
  • drawing force manometer,
  • sheet holder force manometer,
  • Erichsen test tool no. 27 acc. to EN ISO, EURONORM, BS, NF, JIS etc
 

※ 출처 : 여기에 기계플라자 - [G028918] 자동 만능 박판 성형 시험기

'측정/계측/검사/시험' 카테고리의 다른 글

자분 탐상 장비 (MT-System)  (0) 2013.12.16
도장·도료 도포시험기  (0) 2013.12.16
종이굴곡시험기  (0) 2013.12.16
자동 하중 시험기  (0) 2013.12.16
템퍼로  (0) 2013.12.16
Posted by NO1여기에

티스토리툴바