산업포털여기에

제품코드G055650[G055650] 카메라모듈 검사기
판매 회사명라온피플
연락처031-707-7085
홈페이지-
제품홍보관http://blog.yeogie.com/laonpeople
카메라모듈 검사기

LPMC 500 - MIPI 4-Lane / USB3.0 BOARD
라온피플은 국내 최초로 USB3.0 I/F를 지원하는 MIPI 4-Lane 영상 캡춰 보드를 개발했습니다.. 라온피플의 MIPI 4-Lane / USB3.0 solution은 1개의 PC에서 8개의 capture board를 지원하고 고속 capture 시스템을 사용하여 test 시간을 크게 단축시켜 전체적인 카메라 모듈 테스트 장비 비용을 저렴하게 구현하는 것이 가능해졌습니다. 또한 카메라 모듈 테스트 장비에 적합한 Machine Vision Camera, 탁월한 DPM-type barcode decoding 성능을 보유한 바코드 리더기까지 turn-key solution 제공이 가능합니다.

HW Specification

모델명LPMC-500SVLPMC-500CVLPMC-500MF
Input Interface formatMIPI 1,2,3,4 Lane, CCIR601 Conventional parallel interfaceMIPI 1,2,3,4 Lane, CCIR601 Conventional parallel interfaceMIPI 1,2,3,4 Lane, CCIR601 Conventional parallel interface
Image data uploadUSB 3.0 Interface, Maximum data rates - 2.5GbpsUSB 3.0 Interface, Maximum data rates - 2.5GbpsUSB 3.0 Interface, Maximum data rates - 2.5Gbps
Internal Buffer Memory512Mbit DDR2(x16) 1ea512Mbit DDR2(x16) 1ea512Mbit DDR2(x16) 1ea
Connectors for camera InterfaceConnector 70 pins 2.54mm pitchMIPI 40 pins, Parallel 20*2 pins, SPI 4 pins, 2.54mm pitchMIPI 40 pins, Parallel 20*2 pins, SPI 4 pins, 2.54mm pitch
Configuration for LPMC/Camera module registersThrough USB packetThrough USB packetThrough USB packet
Number of Power for Camera1 Fixed 12V source and 1 Fixed 5V source,
4 Programmable power source
1 Fixed 12V source or 1 Fixed 5V source(Selectable)
5 Programmable power source
1 Fixed 12V source or 1 Fixed 5V source(Selectable)
5 Programmable power source
Sensor ClockProgrammable 1KHz ~ 68MHz, by programming the Clock GeneratorProgrammable 1KHz ~ 68MHz, by programming the Clock GeneratorProgrammable 1KHz ~ 68MHz, by programming the Clock Generator
Power SupplyDC +12.0V / 2ADC +12.0V / 2ADC +12.0V / 2A
USB3.0 InterfaceUSB3.0 Standard B Connector.USB3.0 Standard B Connector.USB3.0 Standard B Connector.
Button--Power / Start / Stop
Dimension137.0mm x 110.0mm110.0mm x 80.0mm180mm x 180mm x 46.8mm

HW Specification

모델명LPMC-500DC (LPMC-500CV 또는 LPMC-500SV와 결합해서 사용)
Image Sensor InterfaceMIPI 4 Lane(support for dual MIPI Sensor)
CCIR-601 default 16bit.
SPI 1 Channel / Usable Set GPIO 4ea.
DC testOpen/Short test for 51 pins(MIPI, Parallel, SPI I/F)
Open/Short Test Time : under 1 sec.
Leakage Test for 51 pins
Leakage test time : under 1 sec
Power consumption test : Dynamic / Standby current test
Power consumption test time : under 1 sec (exception sensor initial time)
Internal Buffer Memory1Gbit DDR2.
Connectors for camera InterfaceMIPI : 40pins/ 2.54mm Connector(Straight Male)
Parallel :40pins / 2.54mm Connector(Straight Male)
SPI : 4pins / 2.54mm Connector(Straight Male)
Voltage adjustable for 5 Power channels
(For image sensor)
CH1 : 0.9 ~3V/ 500mA (Sensor core power)
CH2~CH5 : 0.9 ~ 4V/ 500mA (Sensor I/O)
Fixed 5V or 12V for One Power channel(max 500mA)
Current measurement rangeDynamic : 0~500mA / 0.1mA step/ 1~2% Accuracy
Standby : 0~1mA / 0.2uA step/ 1~2% Accuracy
Sensor Main ClockUsable Set. (Programming OSC) : Up to 68Mhz.
Power SupplyDC +12.0V / 2A
Dimensions (LPMC-500CV와 결합시)110mm(H) x 80mm(V) x 31.4mm(D)

Figure

HW Feature (LPMC-500SV 예시)

'로봇/자동화기기' 카테고리의 다른 글

SCANNER&VISION  (0) 2015.04.29
SCANNER&VISION  (0) 2015.04.29
바코드 리더/산업용  (0) 2015.04.27
스마트 카메라 - Overview  (0) 2015.04.27
머신 비전 카메라  (0) 2015.04.27
Posted by NO1여기에