산업포털여기에

하기의 내용은 영문 매뉴얼 설명 및 연결 회로도입니다.

Features at a Glance

The DL05 and DL06 micro PLCs are complete self-contained systems. The CPU,
power supply, and I/O are all included inside the same housing. Option modules
are available to expand the capability of each PLCfamily formoredemandingapplications.

The standardfeaturesof these PLCs are extraordinary and compare favorably
with larger and more expensive PLCs.
The specification tables to the right are meant for quick reference only. Detailed
specifications and wiring information for each model of the DL05 and DL06 PLCs can be found in those specific sections.

Program capacity

Most boolean ladder instructions require a single word of program memory. Other
instructions, such as timers, counters, etc., require two ormorewords.Data isstored in
V-memory in 16-bitregisters.

Performance

The performance characteristicsshown in the tablesrepresent the amount of time required
to read the inputs, solve the Relay Ladder Logic programand update theoutputs.

Instructions

A complete list of instructionsis available at the end of this section.

Communications

The DL05 and DL06 offer powerful communication features normally found
only on more expensive PLCs.

Special features

The DC input and DC output PLCs offer high-speed counting or pulse output.
Option module slots allow for discrete I/O expansion, analog I/O, or additional
communication options.

DirectSOFT software

The DL05 and DL06 PLCs use the same
familiar DirectSOFT programming software that our larger PLCs use. A FREE
version of DirectSOFT gives you all the great features of the full version, butwith a
100-word PLC program download limitation. For programslarger than 100 words,
the full package is required. The FREE PC-DS100 software may be sufficient to
program the DL05 and DL06. If you are programming with a full package version
prior to v5.0, you will need v2.4 or later for theDL05 PLCs and v4.0 or later for the
DL06. We always recommend the latest version for the most robust features. See
the Software section in this catalog for a complete description of DirectSOFT
including features, part numbers of programming packages and upgrades.

Product Dimensions and Installation

It is important to understand the installation requirements for your DL05 or DL06
system. Your knowledge of these requirements will help ensure that your system
operates within its environmental and electrical limits.

Plan for safety

This catalog should never be used as a replacement for the user manual. You can
purchase, download free, or view online the user manuals for these products. The
D0-USER-M is the publication for the DL05 PLCs, and the D0-06USER-M isthe
publication for the DL06 PLCs. The D0-OPTIONS-M is the user manual for
the option modules. These user manuals contain important safety information that
must be followed. The system installation should comply with all appropriate

electrical codes and standards.

Product Dimensions and Installation

Unit dimensions and mounting orientation

DL05 and DL06 PLCs must be mounted properly to ensure ample airflow for
cooling purposes. It is important to follow the unit orientation requirements and to
verify that the PLC’s dimensions are compatible with your application. Notice
particularly the grounding requirements and the recommended cabinet clearances.

Ports, Status Indicators, and Modes

Port 1

Port1isa6-pin,fixedconfigurationportand has the same pin assignments on the DL05
and the DL06. Please refer to the table and diagramsonthispage. Thisport canbeused
to connect to an HPP, DirectSOFT, an operator interface, or other external device.
Featuresinclude:
?9600baud
?8databits
?Oddparity
   ?1startbit,1stopbit
?Stationaddressof1
?Asynchronous,half-duplex,DTE
Protocols supported (as slave):
?Ksequence,DirectNET,ModbusRTU

Port 2

Port 2 is a configurable port on both the DL05 and the DL06 PLCs. The DL05 PLC
uses a 6-pin modular connector and offers RS-232 communications only. The DL06
PLC uses a 15-pin HD-sub connector and offers RS-232, RS-422, or RS-485
communications. Please refer to the table and diagrams on this page for more information.

This port can be used to connect to an HPP, DirectSOFT, an operator interface, or other external device.

Features of
port 2 include:
?300,600,1200,2400,4800,9600(default),
19,200,38,400baud
?8databits
?Odd(default),even,ornoparity
?1startbit, 1stopbit
?Stationaddress:
1(default)
1-90DirectNET,Ksequence
1-247ModbusRTU
?Asynchronous,half-duplex,DTE
Protocols supported:
?Ksequence(slave),DirectNET
(master/slave),Modbus(master/slave)

무료 IEC 61131-3 개발 프로그래밍 툴

 PLC와 산업용 컨트롤러에 대한 자동화 기술 시장을 주도하는 개발 시스템

CODESYS Control System(SoftPLC) 지원

CODESYS Development System은 CODESYS의 제품을 손쉽게 사용할 수 있도록 제공되는 IEC 61131-3 무료 개발 프로그래밍 툴입니다.

디바이스와 연결 시 CODESYS에서 제공하는 SoftPLC 가 필요합니다.

CODESYS는 전문적인 IEC 61131-3 컨트롤러 어플리케이션 작성!

• IEC 61131-3(FBD, LD, IL, ST, SFC)뿐만 아니라 표준의 다른 유형까지 모두 편집
• wizards 통한 프로젝트 구성
• 입력과 데이터 구성을 위한 입력 지원
• 모든 IEC 61131-3을 마우스와 키보드로 쉽게 프로그래밍
• 수많은 CPU 플랫폼에 대한 통합 컴파일러는 컨트롤러 수행을 최적화
• 그래픽 편집을 겸한 종합적인 프로젝트 비교
• 어플리케이션의 빠른 최적화를 위한 광범위한 디버깅과 온라인 기능, 테스트와 커미셔닝을 가속시키는 것
• 유저 인터페이스의 적응력
• 다른 제조업체에 대해서 프로그래밍이 가능한 장치
• 개발 툴과 이용 가능한 구성요소의 투명한 내부 구조
• 프레임워크를 벗어나지 않는 확장력과 적응력
• 자동화 작업의 다양성을 원할하게 통합하는 툴

IEC 61131-3 툴의 객체지향 ? 결과값의 향상!

• 객체지향 프로그래밍(OOP)은 다른 추가적인 툴 없이 이용 가능한 편집기에서 IEC 61131-3 표준의 3판과 완전히 호환가능
• 개발 시간과 오류를 줄이기 위해 비슷한 어플리케이션 부분에 대한 POUs의 상속
• 객체지향은 필수가 아니다. ? 기능과 객체 지향 프로그래밍은 필요에 따라 사용하고 혼합함