산업포털여기에

 NICHIDAI FILTER

NICHIDAI FILTER의 특징

○ 특징

Sus 316, 304의 METALLIC으로 구성되어 있으므로 산, 알칼리, 온도, 점도 등에도 전혀 구애받지 않는다. METALLIC의 두께가 1.5~1.8T 정도이므로 압력에도 견딜 수 있는 특징이 있다. 접충식이므로 휠타의 사용 시간이 길다. 재생시 산, 알칼리에 구애 받지 않는다. 일단 정밀도가 1μ~10μ 정도이면 완전 재생이 어려움으로 초음파 세척기를 사용해야 합니다.

○ 정밀도(μ )
1, 2, 5, 20, 40, 75, 100, 150, 200
※ 위량은 하기 도표를 참조하여 주시기 바랍니다.
    자료가 필요하시면 송부하여 드리겠습니다. 

■ ABSOLTA

• In the case of filtering from 2μ to 10μ, the member of laminations is 11 layers. Ten layers have the identical mesh, and the μ value depends on the compressibility. Another one layer serves for reinforcement and affluence.
• For the filtering pore of greater than 20μ, a coarse mesh wire cloth is used in reinforcing fourth and fifth layers to improve both the pressure resistant strength and backwash property.
• Optimum for every filtration requiring the uniform filtering precision.

■ PORTENT

• A Dutch woven wire cloth is used in the fourth and fifth layers for reinforcement. The surface filtering function displayed at every filtering particle size, and an backwash effect is preeminent. Furthermore, PORTENT has the best resistant strength among other fouler media.
• Optimum for applications requiring a strong pressure resistant strength.

■ Standard Specification (ABSOLTA)

■ Standard Specification (PORTENT)

 CARBON CARTRIDGES FILTER

For removal of Taste/Odor/Scale, or Taste/Odor/Sediment 

CELLULOSE CARTRIDGES FOR TASTE/ODOR/SEDIMENT

ACTIVATED CARBON(CARTRIDGES) FOR TASTE/ODOR
AMETEK'S Granular Activated carbon(GAC) filter cartridges ard designed for effective removal of the tastes and odors of chlorine along with other taste and odors of problems found in water supplies. The cartridges are engineered so the water enters the bottom and is filtered through the entire bed of carbon before exiting at the top. This allows the water the maximum amount of "contact time" with the carbon(the greater the "contact time", the better the absorption).

The cartridges have a polyester screen at the bottom end and spun poly post filter to trap sediment particles along with Buna-N gaskets at each end designed to effect a water tight seall.
Recommended flow : GAC-20-1 g.p.m.     GAC-10-1 g.p.m.
The Blue Canister Body together with a White Cap and White Bottom Ring is a Registered Trademark of AMETEK, Inc.